140 mm, 200 - 1700 RPM, PWM, 72.8 CFM, 123.76 m3/h, 12 V DC, 4-pin + 4-pin, 194 g

Key Features

• Optimised for static pressure
• Ideal choice on heatsinks, radiators and (partly-) covered case vents
• Push- or pull-configuration
• PWM Sharing Technology (PST) regulates fan speed synchronously
• Newly developed, very quiet motor
• Extended life span
• 0 dB mode: silent passive mode when PWM signal is below 5 %

Reasons To Buy

Optimised for Static Pressure

During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

Maximum Quietness, Minimum Vibration

Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.

200 to 1700 RPM regulated via PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Description

Our coolers have pushed the limits further every year - and all that at dropping noise levels. We have put our utmost effort into innovative technologies and fair prices, what made us well known for products with an unparalleled price/performance ratio. We provide you headroom for over-clocking and guarantee you lowest noise levels at affordable prices.

Specifications

Performance
Suitable location	Computer case
Fan connector	4-pin + 4-pin
Pulse-width modulation (PWM) support	Yes
Rotational speed (min)	200 RPM
Rotational speed (max)	1700 RPM
Noise level	0.3 sone
Bearing type	Fluid Dynamic Bearing (FDB)
Noise level (high speed)	24.5 dB
Type	Fan
Fan diameter	14 cm
Supported processor sockets	Not supported
Compatible processor series	Not supported
Maximum airflow	72.8 cfm
Maximum air pressure	2.4 mmH2O
Airflow	123.76 m³/h
Number of fans	1 fan(s)
Number of fan blades	5
Design
Fan connector	4-pin + 4-pin
Number of fans	1 fan(s)
Product colour	Black
Cable length	0.4 m
Number of fan blades	5
Technical details
Noise level (high speed)	24.5 dB
Type	Fan
Fan diameter	14 cm
Supported processor sockets	Not supported
Compatible processor series	Not supported
Maximum airflow	72.8 cfm
Maximum air pressure	2.4 mmH2O
Airflow	123.76 m³/h
Number of fans	1 fan(s)
Cable length	0.4 m
Fan connector	4-pin + 4-pin
Ports & interfaces
Fan connector	4-pin + 4-pin
Power
Starting voltage	3.9 V
Voltage	12 V
Rated current	0.12 A
Power consumption (typical)	1.44 W
Colour
Product colour	Black
Weight & dimensions
Package depth	143 mm
Package width	143 mm
Package height	29 mm
Width	140 mm
Package weight	234 g
Depth	140 mm
Height	27 mm
Weight	194 g
Cable length	0.4 m
Packaging data
Package depth	143 mm
Package width	143 mm
Package height	29 mm
Package weight	234 g
Package type	Box
Packaging content
Screws included	Yes
Number of screws	4
Package type	Box
Other features
Country of origin	China
Harmonized System (HS) code	84733080
Logistics data
Harmonized System (HS) code	84733080